11 Years Factory wholesale AISI304| SUS304| EN1.4948 Factory from Durban

11 Years Factory wholesale
 AISI304| SUS304| EN1.4948 Factory from Durban

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for 11 Years Factory wholesale AISI304| SUS304| EN1.4948 Factory from Durban, We will wholeheartedly welcome all clients in the industry both at home and abroad to cooperate hand in hand, and create a bright future together.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • CONTACT US: ROGERIO@LAVARDA.COM.BR

    WE SELL THE TOOL BY PAYPAL = ROGERIO@LAVARDA.COM.BR

    WEBSTORE: www.torquesrotativa.com/info/english

    LAVARDA IS AN INTERNATIONAL EXPORTER AND DISTRIBUTOR FOR THE THE MANUAL TOWER PINCE PLIER ROTATING / SPINNING TYING TOOL IN BRAZIL.

    Manual Pinza Rotary Tying Pliers a particularly useful hand tool tying iron wire of reinforcing bars on construction sites.

    This mechanical tool enables operator to tie reinforcing bar junctions at an amazing rate of two seconds per tie.

    With a simple movement push-pull action the Manual Tying Tool increase productivity and eliminates fatigue.

    THE THE MANUAL TOWER PINCE PLIER ROTATING / SPINNING TYING TOOL increase the production and eliminates that hard traditional operations of manual tool tying.

    Several diameters of iron wire can be used for Manual Pinza Rotary Tying Pliers with a simple adjusting operation on the lever handle.

    The Pinza Rotary Tying Pliers will lower your risk of hand and wrist injury because it eliminates the frequent and rapid twist motions
    required to tie wire.

    With THE THE MANUAL TOWER PINCE PLIER ROTATING / SPINNING TYING TOOL you will get an increase in productivity.

    • Reduction in employee turnover costs
    • Reduction in training costs
    • Reduction in overtime
    • Reduction of occurrence and costs of injury
    • Increase in productivity

    OTHER DESCRIPTIONS
    - Tower Picer Plier to twist iron steel Wire and stirrup for construction
    - Pincer Pliers to tie iron steel Wire and stirrup for construction
    - Tower Pincer Plier to wrapping iron steel Wire and stirrup for construction
    - Tower Pincer Plier to make clamp for construction
    - Tower Pincer Plier to do clamp for construction
    - Tower Pincer Plier to spin iron steel Wire to make clamp for stirrup for construction
    - Tower Pincer Plier to spin iron steel Wire to do clamp for stirrup for construction
    - Rebar Tying Rotary Tool
    - Knot Tying Tool
    - Rebar Tier for Hand
    - Max Rebar Tying Tool
    - Automatic Rebar Tying Tool
    - Rebar Binding tool
    - Steel Bar Tying tool
    - Bundle Tying tool
    - Tier manual Tool
    - Rotary Pincer Plier
    - Wire Tier Tool
    - Cordless Rotary Tool
    - Tying Tools
    - Rotary Tying Pincer Plier Tool
    - Rotary Tying Pincer Plier Tool
    - Steel Tying Tool
    - Iron tying Tool
    - Steel Tying Pincer Plier Tool
    - Iron tying Pincer Plier Tool
    - Nips Rotary Tying Pincer Pliers
    - knot tying tool
    - Wire tying tool
    - Rebar tie tool
    - Rebar tier tool
    - Wire twister
    - Wire tie tool
    - Manual rebar tier
    - Hand rebar tier



    High Temp Nickel Based & Super Alloys – Mechanical Properties Inconel Round Bar, Plate Sheet Supply – Inconel is made of Mostly Nickel and a few other elements. The origin coming from Supernovas. Inconel is a Super Alloy and Michlin Metals sells Inconel Round Bar, Hex Bar, Flat Bar, Plate, Sheet, Tube and Pipe.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree