10% OFF Price For Metal Forms in Vietnam
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for 10% OFF Price For Metal Forms in Vietnam, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
Using a propane torch and http://MuggyWeld.com’s SSF-six fifty six% silver solder, Mike brazes stainless steel tube to a steel plate. The resulting bond is a tremendous solid 70,000 psi.
SSF-six finishes wonderfully, without the need of a require for grinding or machining, and can be utilized with a propane, oxy-acet, or MAPP gas torch.
For a lot more videos and information, or to purchase, pay a visit to http://MuggyWeld.com
You should browse all recommendations prior to use at: http://muggyweld.com/packets/ssff6ssq6postsale.pdf
You should pay a visit to http://www.aws.org/complex/details/ prior to working with Muggy Weld items, and adhere to all AWS welding protection guidelines. Additional product protection information is available at http://muggyweld.com/protection-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, declare, legal responsibility, or damage of any variety resulting in any way from (a) your use of this Site, (b) any services or items obtained from this Site, (c) any faults in or omissions from this Site, (d) the unavailability or interruption of this Site or any characteristics thereof, (e) any content contained on this Site.
MSDS sheets available with obtain from MuggyWeld.com, on ask for.
Join Eric & Pete in the Go Rhino Garage as they review the popular Dominator D2 side steps as well as the installation process.
Check out this part at gorhino.com: http://www.gorhino.com/part-search/D24235